The Ghost Immobiliser
Immobilisers are a powerful weapon in the fight against vehicle theft. They stop the car from being started without a key fob. They also are effective in stopping hotwiring and other traditional methods of vehicle theft. However, more modern methods such as key cloning and relay theft are becoming more common.
The Ghost Immobiliser was designed to counter these new trends and make your vehicle inaccessible. It's silent and stealthy and does not rely on key fobs, radio signals or LED indicators.
Easy to install
The Ghost Immobiliser is a revolutionary device that connects to the CAN data network within your vehicle to prevent key theft and cloning. It is an TASSA approved product, and is approved by insurance companies. It operates quietly and is almost undetectable to thieves. It makes use of buttons on your steering wheel, centre console, and doors to create a unique pin code sequence that has to be entered before you are able to start your car. You can create up to 20 different sequences to improve security. The system is simple to install and doesn't require any additional hardware.
It is recommended that you use an authorised CAN immobiliser installer that specialises in your specific vehicle type to ensure the best results. Ideally, they will have a workshop located in your area that allows you to go and get the installation completed. They'll also have a variety of tools and materials to assist you in the process of installing. These include hand tools, a multimeter and insulation tape, as well as heat shrink tubing to secure the connections. A user's manual will give instructions specific to the wiring of your vehicle.
Disconnect the battery before beginning the installation to prevent short circuits or airbag deployment. It is crucial to confirm the location of the CAN H and CAN L wires as an incorrect identification could result in improper system integration. It is also a good idea to label or mark the wires. Finally, utilize a multimeter for verification that the identified power source is able to provide a consistent 12V power supply.
Advanced thieves can use various strategies to get around Ghost Immobilisers, including jamming or spoofing. These methods are based on amplifying the signal transmitted from your key fob to the electronic control unit of your vehicle. With advanced anti-jamming techniques and vigilant monitoring, your vehicle can be protected from these sophisticated attacks.
Increased security
Ghost immobilisers provide an additional layer of protection for your vehicle from theft. It is a PIN code security system that can be activated by pressing buttons on the steering wheel or on your dashboard making it difficult for thieves to gain access the device and take your vehicle. The device is also designed to be hidden within the vehicle, and is devoid of any other lights or signals that would signal a potential criminal to its presence. It communicates directly with the ECU of your car through the data bus. This means that it isn't vulnerable to relay attacks or hacking.
This system is a great investment for those who own high-end vehicles, as they are at greater risk of theft due to their worth and popularity. Its enhanced features protect your vehicle from key copying and ECU swapping. Some ghost immobilisers can also be paired with an app, so that you can easily arm and dearm them. They can also be equipped with an option for service/valet that allows you to temporarily deactivate them while your vehicle is being repaired or serviced.
Another benefit of a ghost immobiliser is that it doesn't require wire cutting. This is a good option, particularly if you own a brand newer vehicle which does not come with immobiliser technology built-in to it. Certain systems are equipped to work with an GPS tracking device, which can provide additional security for your vehicle. A GPS tracker could also lower the cost of insurance. If you choose to buy a ghost immobiliser make sure it is TASSA-certified and that an experienced installer installs the device for you.
Compatible with all major models and brands
The Ghost Immobiliser is designed to work with all major makes and models of vehicle, safeguarding your vehicle from theft. It generates a unique pin code using buttons on your steering wheel, console or door panels. You must enter this code before you can drive. The system is tamper-proof and undetectable, and is backed by a three-year warranty. It is also fully endorsed by insurance companies and insurance companies, which means it could help reduce your premiums.
The Ghost system is different from normal immobilisers, which use the key fob to provide ignition control. It connects directly to the engine controller through the CAN bus. It is virtually impossible to disable, remove or hack. The Ghost system can also be linked to an iPhone app to monitor remotely and management.
You can create an PIN code that is easy to remember, yet mathematically, it is impossible for thieves to guess. The PIN can be personalized and modified at any time and you can keep your car secure even if you park it on the street or in a public parking lot. You can also choose a valet or service mode in case you need someone other than you to drive your car for a brief period such as when you're in the garage for maintenance. This feature is also a great way to prevent your vehicle from being stolen by a shady mechanic. To give you more security you can choose a Ghost call alert to notify you if your car is in motion or if it's been moved.
Convenience
The ghost immobiliser guards your vehicle from theft methods such as key cloning or relay attacks. It works by connecting to the vehicle's CAN data network and blocking communication with the engine ECU. This makes it difficult for thieves to duplicate or hack your vehicle, which makes the installation of this system a smart idea for any driver.
After installation, you'll have to enter a PIN sequence up to 20 digits long using the buttons on your dashboard or steering wheel to start the engine. The system is completely hidden and inaccessible to thieves because it does not emit any radio frequency signals. It can also be programmed to change the PIN of the user, which further adds to its security. The system is also designed to avoid cutting the circuit and makes it virtually impossible to alter.
Some systems allow you to connect directly to the immobiliser via an app on your smartphone to disarm it immediately if you forget your PIN. Some even have a service/valet mode that allows you to start your car temporarily, such as when you need to drop it off to be serviced or valet parked.
The Ghost Immobiliser is also undetectable by thieves since it transmits no radio signals. how to install ghost immobiliser g28carkeys is a major advantage compared to other security systems that are sold aftermarket. It is also easy to use and doesn't require complex wiring. It can also be used in conjunction with a dash cam to provide additional security. Dash cam Thinkware F70 features clear and crisp 1080p HD footage, Format Free Technology, and parking mode. The system can also be wired for optimal performance and longevity.
Installation
It is crucial to select the most effective immobiliser ghost to shield your vehicle from thieves. This device will help to in preventing theft of your car by blocking communication between the engine controller unit (ECU) and key fobs. This device stops thieves from stealing and cloning the signal used to start your vehicle. It can also detect any time it has been tampered with and notify the owner of the vehicle.
The device is easy to install and can be used with the existing systems in your vehicle. It doesn't require any modifications to the vehicle wiring and can be positioned in a hidden location such as under the dashboard. Follow the steps in the manual to ensure the device is installed correctly. It is also crucial to test the system after installing it. This will ensure that the ghost of the immobiliser functions as intended.
You can purchase an Autowatch Ghost 2 Immobiliser from a certified installer and have it installed in your vehicle. The installer will connect the Ghost to the CAN Bus network in your vehicle, which makes it difficult for thieves to steal or bypass the system. The installation process usually takes 2-3 hours.
During the installation process, it is recommended to look up the wiring diagram for the vehicle model you are using. This will allow you to locate the CAN High and CAN Low wires that are required to connect the Ghost to the engine of your vehicle. It is also essential to verify the connections to ensure that they are safe and well-insulated.
Once the installation is complete and you are able to use the Ghost Immobiliser during normal operation. It will shut off the ignition of your vehicle if it is not able to start it using the correct PIN, which you can enter yourself. The immobiliser ghost can be set to Service/Valet Mode for when you need your vehicle to be serviced or valet-parked.